2″ Horizontal Blinds Metal Hold Down Brackets (2)

  • How to Install Metal Hold Down Brackets (for a 2" blind)
  • How to Install Plastic Hold Down Brackets (for a 2" blind)
  • How to Measure for Hold Down Brackets
  • How to Install Plastic Hold Down Brackets (for 1" Blinds)
  • Hold down brackets for your blinds
  • Chicology Home | Faux Wood Blinds Tutorial – Install Hold Down Bracket (Step 7/7)
  • Common Tilting and Wand Problems You May Experience On Your Blinds
  • Venetian Blind Bracket
  • Five Most Common Problems With Vertical Blinds
  • Chainage 2 ~ How To Replace Vertical Blind Chains ~ Type 2
«
»
Rating: 
Amazon Price: $4.92 $4.92 (as of November 24, 2017 3:51 am – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

Hold Down Bracket for some 2 Inch Blinds. Zinc Plated. Made for 2" wood blinds and faux wood blinds. Comes with one pin per bracket. ***If you need to drill a hole in the bottom rail of your blinds to accommodate the pin, use a 7/64" or 3/32" drill bit.*** How to Install: 1) You will need: A drill and a bit set or a driver set (or a screwdriver,) a tape measure, hammer, and pencil. 2) If the bottom rail does not have pins installed, drill a hole in the center about a 1/2" deep using a 7/64" or 3/32" drill bit to accommodate the pin on both sides of the rail. 3) Tap the pins in. 4) With the blind down and the bottom rail even, put a hold down bracket in place and mark its position with a pencil. 5) Install the bracket onto the door with screws. 6) Measure the position of this bracket that is now screwed in place on the door and mark the other side. 7) Then repeat the previous steps to install the second bracket. There are also videos on YouTube on how to install these brackets.

Shares 0